Superior Shield is an excellent product for metal coating.
Shield Products has solved problems in many industries and applications through their fluoropolymer blend. Due to its unique no rust, no corrosion benefits, Superior Shield has been applied to various types and grades of metals. The water works industry takes advantage of the superior corrosion and rust resistance properties by coating T-head bolts for underground service. Stainless steel fasteners, used in many different industries, are coated for lubricity, anti-seizing, anti-galling and anti-stick. These metals are commonly used by turn around groups, operations and maintenance departments and contractors at many industrial factories, chemical plants, refineries and offshore platforms. The fluoropolymer coating will outlast galvanization and is easier and quicker to apply, in any color. Any color is available. See our color chart or we will match your custom color for $65 per hour to match ANY color.

Superior Shield Excellent for Metals
Shield Products has solved problems in many industries and applications. Due to its unique benefits Superior Shield has been applied to various types and grades of metals. The water works industry takes advantage of the superior corrosion and rust resistance properties by coating T-head bolts for underground service. Stainless steel fasteners, used in many different industries, are coated for lubricity and anti-galling. These metals are commonly used by turn around groups, operations and maintenance departments and contractors at many chemical plants, refineries and offshore platforms. The coatings chemical resistance and easy on/easy off characteristics are perfect for these environments. A few specific applications where problems have been solved by using this coating process are.

• Oxygen Service
• Monochlorobenzene (MCB)
• Anhydrous HCL
• Phosgene Gas Lines
• Formaldehyde
• Water Lines Insulated
• Boiler Rooms
• Aniline
• Piping (Non-Insulated)
• Gas Meters
• Steam
• Piping
• Copper/Brass
• Steel w/wo Primer
• Stainless Steel
• Fuel tanks, interior & exterior

Technical Data:
Use Temperatures:
-100° to 500°F

Adhesion:
5B (ASTM D3359-95)

Corrosion Resistance:
Salt Spray (ASTM B117) Test to 4,000 hrs

Dielectric Strength:
500 Volts per mil

Pencil Hardness:
8H (ASTM D3363-92A)

Elongation:
50%

Kinetic Friction Coefficient:
0.06 - 0.08

Tensile Strength:
4,000 psi

Thickness:
Nominal 0.001" (1 mil)

Operating Pressure:
Up to 100,000 psi

Impact:
160 Inch Lbs (ASTM D2794-93)

Kestemich Test:
Nuts not frozen after 30+ cycles (DIN 50018)

Coverage: 500-650 SF

Durability: 20-30 year formula (Note: This product has been successfully tested in Accelerated Aging Laboratories for 60 years with insignificant loss of hardness or flexibility.)

Corrosion Resistance:
D1308 Muratic Acid 31% HCL 24 Hours No Effect
D1308 Sulfuric Acid 93% H2SO4 24 Hours No Effect
D1308 Caustic Soda 100% NaOH 24 Hours No Effect
D1308 Methyl Ethyl Keytone (MEK) 24 Hours No Effect
D1308 Salt Fog 1000 Hours No Effect

Shield Products has perfected the Fluoropolymer fastener coating process. Surface preparation of the fastener prior to coating is a very important step. Use the latest industry accepted methods to thoroughly clean all contaminants from the fasteners. Manufacturing oils, rust and scale are removed to ensure the highest quality coating. FLUOROPOLYMER coatings are extremely durable (20-30 years) and not easily removed during normal usage. During assembly of fasteners in the field, the coating can sometimes be damaged. With most other
coatings, this results in exposed bare metal that quickly begins to show corrosion and causes the coating to fail. Our coating ensures superior corrosion resistance, does not chip and continues to provide protection even under water and the harshest conditions. For further information please call 912-667-8702

HOME PAGE ©2011, Kool Coatings (dot) com. All rights reserved