Product Description

Superior Shield Coatings Radiant Barrier with Ceramic Spheres #20059R20SB & #20062R20WB

Super Shield is a high performance fluoropolymer resin that offers superior durability. This super hard and flexible top coating is the:

• · Hardest and most flexible coating on the market
• · Will not fade, crack, peel, chip, chalk or yellow
• · Impervious to many chemicals
• · Prevents algae, mildew, mold, growth, staining and rust
• · Corrosion resistant
• · Offered in any color or finish
• · Materials are able to be recoated
• · Great adhesion
• · Fast drying
• · VOC compliant
• · Reduces radiant heat transfer
• · Reflects, refracts, and blocks heat radiation and dissipates heat rapidly presenting heat transfer through the coating
• · 90% of solar infrared rays and 85% UV rays are radiated back into the atmosphere
• · Allows for touch up with the same durable coating system as in the original application
• · Use on plastic film, aluminum, steal, brass, copper, concrete, fiberglass, glass, vinyl or wood
• · Resistant to weathering and UV degradation
• · Will retain appearance over expected life of 20 years or more
• · Application can be sprayed, brushed or rolled

Superior Shield Standard #20059SB & #20062WB

· Fluoropolymer two component resin.

• · Formulated to provide the ultimate in resistance to weathering and ultraviolet degradation with unsurpassed gloss retention.
• · Will retain its appearance over an expected life up to 10 years in even the most aggressive environments
• · Comes clear or in any color, gloss or satin finish
• · Can be used as a top coat or primer
• · Can be used on concrete, glass, fiberglass, vinyl, plastic, painted or unpainted surfaces
• · Excels in high demand surfaces
• · Has excellent adhesion, durability and hardness
• · VOC compliant
• · Application can be sprayed, brushed, or rolled

Super Cleaner #50800

· Ready to use. · Best Fluoropolymer compatible cleaner available.

• · Removes grease, dirt, minor rust, common stains, inks, algae, mildew, oxidation & black run-off stains
• · Leaves no residue when rinsed
• · Not harmful to finishes
• · Emulsifies with water
• · Can be diluted
• · Best used with a high-pressure washer
• · USDA approved
• · Biodegradable
• · Formulated for home, marine, commercial and industrial use
• · Effective on fiberglass, vinyl, canvas, wood, plastics, chrome, stainless, porcelain, tile and linoleum

Shield Metal Prep #40003

Removes heavy tarnish, corrosion and rust from all metal. · Use on:

• Automobiles
• Trucks
• Boats & Marine Equipment
• Wrought Iron
• Yard and Patio Furniture
• Porcelain Stain
• Metal Signs
• Building Maintenance
• Air Conditioning Units
• Farm Equipment
• Steel Tanks
• Fine Metals
• Designed to self-neutralize and leave a tough protective film
• Ready to use without dilution, however as much as 25% pure water may be added to reduce drying time in very humid conditions
• Penetrates into hard-to-get places
• Covers approximately 1000 square feet to the gallon
• Removes light stains immediately and heavier rust in 30 minutes or less
• Eliminates the need for sand blasting, scraping, wire brushing or sanding for many applications

Superpro Adhesion Promoter (tile & concrete prep & cleaner) #50803

· For use on flexible and rigid plastic parts, glass, chrome, aluminum, fiberglass, rubber, vinyl and painted surfaces.

• · Halogen content of polymers lends itself to fire retardant properties
• · Barrier properties make resins ideal for anti-corrosive primer application
• · Ready to use
• · Promotes adhesion on most plastic surfaces including TPO, polypropylene, and SMC.
• · Compatible with solvent-based urethane, epoxy, acrylic lacquers, primers, sealers and base coats

Epoxy Primer #20900

· A two component high performance polyamide epoxy coating primer and sealer. · Offers excellent sealing capabilities.

Epoxy Top Coat (white or clear) #20200SB & #20300WB

· A two-component waterborne polyamide-epoxy coating .

• · Tough, durable finish
• · Chemical resistance
• · Excellent adhesion.
• · Low odor and low VOC
• · Lead chromate and mercury free
• · Provides excellent protection in severe corrosive and chemical environments
• · Recommended for use on steel and masonry in interior and exterior exposures, either as an intermediate coat, or as a finish coat.
• · Excellent coating for concrete floors, concrete pipes, walls, wood, steel tanks and structures and properly primed metal surfaces.
• Not recommended for immersion service
• · Fast Curing
• · High performance
• · Resistance to fresh and salt water
• · Long lasting abrasion and moisture protection

Gloss Modifier #ATS101WB or SB

· A flattener that can be mixed into our fluoropolymer or Fluoroblend solvent or water base formulas to convert gloss to satin or matt finishes.

Fluoroseal Primer Sealer #50802 & #50806

• · Single component
• · For industrial, commercial and residential use as a primer on properly prepared plaster, wallboard, metal or masonry.
• · Excellent for use as a primer/sealer for finish coats of latex or alkyd paints on interior walls and ceilings
• · Excellent adhesion
• · Can be top coated with latex or alkyd coatings
• · Fast drying
• · Low odor
• · Easy application
• · Lead, chromate and mercury free
• · Low VOC
• · Flat finish
• · Nonvolatile
• · Anti-corrosive
• · Fire retardant properties
• · Excellent moisture vapor transmission rate (MVTR)
• · Gas barrier
• · Chemical resistant (not suitable for aromatic solvent resistance or natural oils such as animal and vegetable oils
• · Excellent weather ability
• · Mechanical properties - exhibits a good balance of hardness, tabor abrasion and resistance and flexibility
• · Salt spray resistant

Fluoroblend Coating #66070WB & #66071SB

• · Single component
• · Self cross linking
• · Resistant to weathering
• · Resistant to ultraviolet degradation
• · Unsurpassed gloss retention
• · Retain appearance for over 10 years
• · Can be used as a shop, field application top coat
• · Finishes in satin or gloss
• · Can be sprayed or rolled

Microshield Plus # 20069-1P, #20069-1A & #20071-1AM

Microshield Plus products are revolutionizing architectural window cleaning. Microshield Plus works by using cerium oxide to provide both a chemical and mechanical polishing mechanism to polish glass. A transparent Treatment is applied to glass and other surfaces that repels dirt and grime deposits. When the protected surface is exposed to a water source, the water is transformed into a thin sheeting layer and dirt is easily rinsed away. During this sheeting action, also called a “hydrophilic” effect, water spreads evenly over the window surface to flush the surface clean, accelerates drying and leaves a spotless finish.

Microshield Plus is a two-step process that first cleans and polishes windows back to their original condition then, provides an invisible protection to keep windows cleaner longer.

Microshield Plus Part 1

Releases stubborn stains from glass surfaces including calcium, magnesium, iron, and silicate stains. Works more effectively than other stain removers, especially on precast concrete stains and post construction stain removal projects Non-greasy paste makes rinsing easier and faster. Safe to handle. Produces a highly reflective finish and glass that GLISTENS. May also be used as a cleaner for window mullions and shower doors. Low abrasive-Can be applied with mechanical buffer

Microshield Plus Part 2

Maintains hydrophilic properties for up to two years with routine water source Rain and water sheets down window which washes away dirt and grime and keeps window free of spots and streaks Repels deposition of dirt and grime Safe to handle Easy to apply—no rubbing or buffing required Includes Microshield Plus Microfiber Cloth for application

HOME PAGE ©2011, Kool Coatings (dot) com. All rights reserved